Anpinglobal
와이어 메쉬 가장자리 처리 가이드: 절단면, 감싼 가장자리, 프레임 등
직조 메쉬, 용접 메쉬, 가공 부품의 가장자리 처리를 선택할 때 안전성, 강성, 조립 적합성, 비용을 비교합니다.
구매 핵심 요약
이 페이지는 먼저 한국어 요약을 제공하고, 아래에 기술 확인용 영어 원문을 배치합니다.
직조 메쉬, 용접 메쉬, 가공 부품의 가장자리 처리를 선택할 때 안전성, 강성, 조립 적합성, 비용을 비교합니다.
영문 원문 가이드
Edge treatment changes how the mesh is used and handled
Many buyers quote aperture, wire diameter, and size correctly but overlook the edge condition. Cut edges may be acceptable for internal filtration or hidden assembly, while wrapped, welded, framed, or hemmed edges may be necessary for safety, stiffness, or visual finish.
The right edge depends on assembly and user contact
A decorative panel, machine guard, basket, or screen tray may each need a different edge solution. A good RFQ should explain whether the mesh is touched by operators, inserted into a frame, welded into an assembly, or installed as a visible finish component.
Do not leave edge condition to assumption
- State whether the edge is cut, folded, framed, welded, or banded.
- Confirm burr limits, corner condition, and allowable exposed wire ends.
- Ask how edge treatment changes dimensional tolerance and packing method.
Clear edge requirements reduce rework because many complaints come from finishing detail rather than the mesh body itself.
견적 또는 사양 검토가 필요하신가요?
제품명, 재질, 망목 크기, 선경, 수량, 도착항, 요구 규격을 [email protected] 으로 보내주세요.
블로그