Anpinglobal
ワイヤーメッシュ端部処理ガイド: 切り放し、巻き込み、フレーム付きなど
織金網、溶接網、加工部品の端部処理を選ぶ際の、安全性、剛性、組付け性、コストを比較します。
購入判断の要点
このページでは先に日本語の要点を示し、その後に技術確認用の英語原文を掲載しています。
織金網、溶接網、加工部品の端部処理を選ぶ際の、安全性、剛性、組付け性、コストを比較します。
英語原文ガイド
Edge treatment changes how the mesh is used and handled
Many buyers quote aperture, wire diameter, and size correctly but overlook the edge condition. Cut edges may be acceptable for internal filtration or hidden assembly, while wrapped, welded, framed, or hemmed edges may be necessary for safety, stiffness, or visual finish.
The right edge depends on assembly and user contact
A decorative panel, machine guard, basket, or screen tray may each need a different edge solution. A good RFQ should explain whether the mesh is touched by operators, inserted into a frame, welded into an assembly, or installed as a visible finish component.
Do not leave edge condition to assumption
- State whether the edge is cut, folded, framed, welded, or banded.
- Confirm burr limits, corner condition, and allowable exposed wire ends.
- Ask how edge treatment changes dimensional tolerance and packing method.
Clear edge requirements reduce rework because many complaints come from finishing detail rather than the mesh body itself.
見積や仕様確認が必要ですか？
製品名、材質、目開き、線径、数量、仕向港、要求規格を [email protected] へ送ってください。
ブログ