Anpinglobal
溶接前亜鉛めっきと溶接後亜鉛めっき: 溶接メッシュで何が変わるか
めっき工程の違いが、被膜の連続性、耐食性、価格、用途適合性にどう影響するかを整理します。
購入判断の要点
このページでは先に日本語の要点を示し、その後に技術確認用の英語原文を掲載しています。
めっき工程の違いが、被膜の連続性、耐食性、価格、用途適合性にどう影響するかを整理します。
英語原文ガイド
Before-weld galvanizing is common for cost-sensitive orders
Galvanized-before-welding mesh is made from pre-galvanized wire. It is often competitive on price and suitable for applications where full post-weld coating continuity is not the main concern.
After-weld galvanizing covers the weld area better
Galvanized-after-welding products usually provide stronger corrosion protection at the welded intersections because the complete panel or roll is coated after welding. This route is often preferred for longer outdoor life.
Specify the route clearly in the RFQ
- Do not write only "galvanized welded mesh".
- State GBW or GAW, expected environment, and packing format.
- Confirm zinc expectation if the project is corrosion-sensitive.
That single clarification prevents many coating disputes after production.
見積や仕様確認が必要ですか？
製品名、材質、目開き、線径、数量、仕向港、要求規格を [email protected] へ送ってください。
ブログ