Anpinglobal
工業バイヤー向けワイヤーメッシュフィルターシリンダー製作ガイド
カスタムフィルターシリンダーを発注する前に、継ぎ目方式、支持構造、エンドキャップ、公差、洗浄要件を確認します。
購入判断の要点
このページでは先に日本語の要点を示し、その後に技術確認用の英語原文を掲載しています。
カスタムフィルターシリンダーを発注する前に、継ぎ目方式、支持構造、エンドキャップ、公差、洗浄要件を確認します。
英語原文ガイド
Filter cylinders are fabrication products, not just rolled mesh
Many buyers quote a cylinder with mesh count and diameter only, but the final part depends on seam method, support layer, end ring or cap design, length tolerance, and how the cylinder fits into the housing. A good RFQ treats the cylinder as an assembly.
Seam quality and support logic affect service life
Spot weld, overlap seam, framed seam, and reinforced support structures each fit different process loads. A cylinder used in light straining duty is very different from one that must hold shape under pressure, backwash, or repeated cleaning.
Send the fabrication details up front
- Provide diameter, length, seam style, support mesh, and cap detail.
- Confirm whether burr control, electropolish, or cleaning is required.
- Ask how cylinders are packed to prevent ovality during export transit.
Most cylinder problems begin when the buyer quotes raw mesh but expects a finished filter component.
見積や仕様確認が必要ですか？
製品名、材質、目開き、線径、数量、仕向港、要求規格を [email protected] へ送ってください。
ブログ